BMW 5 Series (E34) 1989-1995 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 5 Series built from 1989 to 1995 (525i, 525i Touring, 530i, 530i Touring, 535i, 540i, M5).

Fitment specs

Bolt pattern5X120
Center bore72.6 mm
Lug threadM12x1.5
Model years1989-1995
GenerationE34

Every 1989-1995 BMW 5 Series uses a 5X120 bolt pattern with a 72.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 72.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M12x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW 5 Series (E34) and the model years each was sold. All of them share the 5X120 bolt pattern.

SubmodelYearsFactory wheel sizes
525i1989-199515x6.5 +20
15x7 +20
525i Touring1992-199515x7 +20
16x7 +20
530i1994-199515x6.5 +20
15x7 +20
530i Touring1994-199515x7 +20
16x7 +20
535i1989-199315x6.5 +20
15x7 +20
540i1994-199515x6.5 +20
15x7 +20
17x9 +22
M51991-199317x9 +22
18x9 +22

Factory wheel sizes

Wheel sizes BMW fitted to the 1989-1995 BMW 5 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
15x6.5 +20
15x7 +20
16x7 +20
17x9 +22
18x9 +22

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1989-1995 BMW 5 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

525i, 530i, 535i

DiameterWidthOffset range
15-16"6.5"-3 to +30
15-16"7"+3 to +25
15-16"7.5"+9 to +19

Wider still: 15x8.5 +1 to +12; 16x8.5 +1 to +12 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

525i Touring, 530i Touring

DiameterWidthOffset range
15-16"7"+3 to +25
15-16"7.5"+9 to +19

Wider still: 15x8.5 +1 to +12; 16x8.5 +1 to +12 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

540i

DiameterWidthOffset range
15-17"6.5"-3 to +30
15-17"7"+3 to +25
15-17"7.5"+9 to +19

Wider still: 15x8.5 +1 to +12; 16x8.5 +1 to +12; 17x8.5 +1 to +12 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

M5

DiameterWidthOffset range
17-18"9"+22

FAQ

What is the bolt pattern of the 1989-1995 BMW 5 Series?

The 1989-1995 BMW 5 Series (E34) uses a 5X120 bolt pattern and a 72.6 mm center bore.

What size wheels came on the 1989-1995 BMW 5 Series from the factory?

Factory sizes: 15x6.5 +20; 15x7 +20; 16x7 +20; 17x9 +22; 18x9 +22.

What lug thread size does the 1989-1995 BMW 5 Series use?

Its wheel fasteners use a M12x1.5 thread.

What aftermarket wheel sizes fit the 1989-1995 BMW 5 Series without modifications?

Bolt-on sizes run from 15" to 18" in diameter; see the size table for the offset range at each width.