Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 5 Series built from 2017 to 2022 (530i, 530i xDrive, 530e, 530e xDrive, 540i, 540i xDrive, M550i xDrive, M5).
Every 2017-2022 BMW 5 Series uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 5 Series (G30) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 530i | 2017-2022 | 19x8.5 +29 19x8.5 +29 front / 19x10 +46 rear 20x8.5 +28 front / 20x10 +46 rear 21x8.5 +32 front / 21x10 +46 rear |
| 530i xDrive | 2017-2022 | 19x8.5 +29 19x8.5 +29 front / 19x10 +46 rear 20x8.5 +28 front / 20x10 +46 rear 21x8.5 +32 front / 21x10 +46 rear |
| 530e | 2018-2022 | See factory sizes below |
| 530e xDrive | 2018-2022 | See factory sizes below |
| 540i | 2017-2022 | See factory sizes below |
| 540i xDrive | 2017-2022 | 19x8.5 +29 19x8.5 +29 front / 19x10 +46 rear 20x8.5 +28 front / 20x10 +46 rear 21x8.5 +32 front / 21x10 +46 rear |
| M550i xDrive | 2018-2022 | See factory sizes below |
| M5 | 2018-2022 | See factory sizes below |
Wheel sizes BMW fitted to the 2017-2022 BMW 5 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +27 |
| 18x8 +30 |
| 18x8 +30 front / 18x9 +44 rear |
| 18x9 +44 |
| 19x8 +30 |
| 19x8 +30 front / 19x9 +44 rear |
| 19x9 +44 |
| 20x8 +30 front / 20x9 +44 rear |
| 20x9 +44 |
Widths and offsets with Verified Fitment on the 2017-2022 BMW 5 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 19-21" | 8.5" | +19 to +39 |
| 19-21" | 9" | +26 to +45 |
| 19-21" | 9.5" | +32 to +43 |
Wider still: 19x10.5 +24 to +36; 19x11 +30; 20x10.5 +24 to +36; 20x11 +30; 21x10.5 +24 to +36; 21x11 +30 fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | +7 to +37 |
| 17-20" | 8" | +13 to +43 |
| 17-20" | 8.5" | +19 to +50 |
| 17-20" | 9" | +26 to +49 |
| 17-20" | 9.5" | +32 to +43 |
Wider still: 17x10.5 +24 to +36; 17x11 +30; 18x10.5 +24 to +36; 18x11 +30; 19x10.5 +24 to +36; 19x11 +30… fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2017-2022 BMW 5 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)























Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)








The 2017-2022 BMW 5 Series (G30) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +27; 18x8 +30; 18x8 +30 front / 18x9 +44 rear; 18x9 +44; 19x8 +30; 19x8 +30 front / 19x9 +44 rear; 19x9 +44; 20x8 +30 front / 20x9 +44 rear; 20x9 +44.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.