Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 7 Series built from 2016 to 2022 (740i, 740i xDrive, 740e xDrive, 745e xDrive, 750i xDrive, M760i xDrive, ALPINA B7).
Every 2016-2022 BMW 7 Series uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the BMW 7 Series (G11/G12) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| 740i | 2016-2022 | 17x7.5 +27 18x8 +30 19x8.5 +25 19x8.5 +25 front / 19x9.5 +39 rear 20x8.5 +25 front / 20x10 +41 rear 21x8.5 +25 front / 21x10 +41 rear |
| 740i xDrive | 2016-2022 | 17x7.5 +27 18x8 +30 19x8.5 +25 19x8.5 +25 front / 19x9.5 +39 rear 20x8.5 +25 front / 20x10 +41 rear 21x8.5 +25 front / 21x10 +41 rear |
| 740e xDrive | 2017-2019 | See factory sizes below |
| 745e xDrive | 2020-2022 | 17x7.5 +27 18x8 +30 19x8.5 +25 19x9.5 +39 20x10 +41 21x10 +41 |
| 750i xDrive | 2016-2022 | 18x8 +30 19x8.5 +25 19x9.5 +39 20x10 +41 21x10 +41 |
| M760i xDrive | 2017-2022 | 20x10 +41 21x10 +41 |
| ALPINA B7 | 2017-2022 | See factory sizes below |
Wheel sizes BMW fitted to the 2016-2022 BMW 7 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +27 |
| 18x8 +30 |
| 19x8.5 +25 |
| 19x8.5 +25 front / 19x9.5 +39 rear |
| 19x9.5 +39 |
| 20x8.5 +25 front / 20x10 +41 rear |
| 20x10 +41 |
| 21x8.5 +25 front / 21x10 +41 rear |
| 21x10 +41 |
Widths and offsets with Verified Fitment on the 2016-2022 BMW 7 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-21" | 7.5" | -5 to +37 | +7 to +37 |
| 17-21" | 8" | +1 to +37 | +13 to +35 |
| 17-21" | 8.5" | +8 to +30 | +19 to +29 |
| 17-21" | 9" | +14 to +24 | — |
Wider still: 17x10 front +6 to +17 / rear —; 18x10 front +6 to +17 / rear —; 19x10 front +6 to +17 / rear —; 20x10 front +6 to +17 / rear —; 21x10 front +6 to +17 / rear — fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 7.5" | -5 to +37 | +7 to +37 |
| 20" | 7.5" | -5 to +37 | — |
| 17-19" | 8" | +1 to +37 | +13 to +35 |
| 20" | 8" | +1 to +37 | — |
| 17-19" | 8.5" | +8 to +30 | +19 to +29 |
| 20" | 8.5" | +8 to +30 | — |
| 17-20" | 9" | +14 to +24 | — |
Wider still: 17x10 front +6 to +17 / rear —; 18x10 front +6 to +17 / rear —; 19x10 front +6 to +17 / rear —; 20x10 front +6 to +17 / rear — fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-21" | 8" | +1 to +37 | +13 to +35 |
| 18-21" | 8.5" | +8 to +30 | +19 to +29 |
| 18-21" | 9" | +14 to +24 | — |
Wider still: 18x10 front +6 to +17 / rear —; 19x10 front +6 to +17 / rear —; 20x10 front +6 to +17 / rear —; 21x10 front +6 to +17 / rear — fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 20-21" | 10" | +27 to +41 | +38 to +41 |
Wider still: 20x10.5 front +13 to +34 / rear —; 21x10.5 front +13 to +34 / rear — fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2016-2022 BMW 7 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.








Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

















Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)
















Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)









The 2016-2022 BMW 7 Series (G11/G12) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 17x7.5 +27; 18x8 +30; 19x8.5 +25; 19x8.5 +25 front / 19x9.5 +39 rear; 19x9.5 +39; 20x8.5 +25 front / 20x10 +41 rear; 20x10 +41; 21x8.5 +25 front / 21x10 +41 rear; 21x10 +41.
Its wheel fasteners use a M14x1.25 thread.
Bolt-on sizes run from 17" to 21" in diameter; see the size table for the offset range at each width.