BMW 7 Series (G70) 2023-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the BMW 7 Series built from 2023 to 2026 (740i, 740i xDrive, 750e xDrive, 760i xDrive, i7 eDrive50, i7 xDrive60, i7 M70 xDrive).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.25
Model years2023-2026
GenerationG70

Every 2023-2026 BMW 7 Series uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.25. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the BMW 7 Series (G70) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
740i2023-202620x9 +24 front / 20x10.5 +44 rear
740i xDrive2024-2026See factory sizes below
750e xDrive2024-2026See factory sizes below
760i xDrive2023-2026See factory sizes below
i7 eDrive502024-2026See factory sizes below
i7 xDrive602023-2026See factory sizes below
i7 M70 xDrive2024-2026See factory sizes below

Factory wheel sizes

Wheel sizes BMW fitted to the 2023-2026 BMW 7 Series from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x8.5 +26
20x9 +24 front / 20x10.5 +44 rear
21x9 +24 front / 21x10.5 +44 rear
22x9 +24 front / 22x10.5 +43 rear

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2023-2026 BMW 7 Series: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

740i

DiameterWidthFront offsetRear offset
20-21"9"+7 to +29—
20-21"9.5"+13 to +23—
20"10.5"—+34 to +44

740i xDrive, 750e xDrive, 760i xDrive, i7 eDrive50, i7 xDrive60, i7 M70 xDrive

DiameterWidthFront offsetRear offset
19-20"8.5"+1 to +36+9 to +31
21"8.5"+1 to +36—
19-20"9"+7 to +29+15 to +25
21"9"+7 to +29—
19-21"9.5"+13 to +23—

Wider still: 19x10.5 front +5 to +16 / rear —; 20x10.5 front +5 to +16 / rear —; 21x10.5 front +5 to +16 / rear — fit with modifications (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2023-2026 BMW 7 Series. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

740i

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

740i xDrive, 750e xDrive, 760i xDrive, i7 eDrive50, i7 xDrive60, i7 M70 xDrive

Modifications Required (roll rear fender lips, adjustable rear camber arms for -1.5° or more, front camber plates, hub-centric rings if wheel bore is larger than the hub)

FAQ

What is the bolt pattern of the 2023-2026 BMW 7 Series?

The 2023-2026 BMW 7 Series (G70) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2023-2026 BMW 7 Series from the factory?

Factory sizes: 19x8.5 +26; 20x9 +24 front / 20x10.5 +44 rear; 21x9 +24 front / 21x10.5 +44 rear; 22x9 +24 front / 22x10.5 +43 rear.

What lug thread size does the 2023-2026 BMW 7 Series use?

Its wheel fasteners use a M14x1.25 thread.

What aftermarket wheel sizes fit the 2023-2026 BMW 7 Series without modifications?

Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.