Ford F-150 (PN96) 1997-2004 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford F-150 built from 1997 to 2004 (Work, Standard, XL, XLT, Lariat, King Ranch, Harley-Davidson, STX, Heritage).

Fitment specs

Bolt pattern5X135
Center bore87.1 mm
Lug threadM14x2.0
Model years1997-2004
GenerationPN96

Every 1997-2004 Ford F-150 uses a 5X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x2.0. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford F-150 (PN96) and the model years each was sold. All of them share the 5X135 bolt pattern.

SubmodelYears
Work1997-2003
Standard1997-1998
XL1997-2003
XLT1997-2003
Lariat1997-2003
King Ranch2001-2003
Harley-Davidson2000-2003
STX2003-2004
Heritage2004

Factory wheel sizes

Wheel sizes Ford fitted to the 1997-2004 Ford F-150 from the factory. Offsets are ET in millimeters.

Factory size
16x7 +14
17x7.5 +14

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1997-2004 Ford F-150: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
16-22"7"-3 to +20
16-22"7.5"+3 to +13

Wider still: 16x8.5 -5 to +6; 17x8.5 -5 to +6; 18x8.5 -5 to +6; 19x8.5 -5 to +6; 20x8.5 -5 to +6; 21x8.5 -5 to +6… fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).

FAQ

What is the bolt pattern of the 1997-2004 Ford F-150?

The 1997-2004 Ford F-150 (PN96) uses a 5X135 bolt pattern and a 87.1 mm center bore.

What size wheels came on the 1997-2004 Ford F-150 from the factory?

Factory sizes: 16x7 +14; 17x7.5 +14.

What lug thread size does the 1997-2004 Ford F-150 use?

Its wheel fasteners use a M14x2.0 thread.

What aftermarket wheel sizes fit the 1997-2004 Ford F-150 without modifications?

Bolt-on sizes run from 16" to 22" in diameter; see the size table for the offset range at each width.