Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford F-150 built from 2024 to 2026 (XL, STX, XLT, Lariat, Tremor, King Ranch, Platinum, Limited, Raptor, Raptor R).
Every 2024-2026 Ford F-150 uses a 6X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford F-150 (P702) and the model years each was sold. All of them share the 6X135 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| XL | 2024-2026 | See factory sizes below |
| STX | 2024-2026 | 20x8.5 +44 |
| XLT | 2024-2026 | See factory sizes below |
| Lariat | 2024-2026 | 18x7.5 +44 18x8.5 +44 20x8.5 +44 |
| Tremor | 2024-2026 | 18x7.5 +34 18x7.5 +44 18x8.5 +44 |
| King Ranch | 2024-2026 | 20x8.5 +44 |
| Platinum | 2024-2026 | 20x8.5 +44 |
| Limited | 2024-2026 | 22x9 +44 |
| Raptor | 2024-2026 | 17x7.5 +44 17x8.5 +34 |
| Raptor R | 2024-2026 | See factory sizes below |
Wheel sizes Ford fitted to the 2024-2026 Ford F-150 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +44 |
| 17x8.5 +34 |
| 18x7.5 +34 |
| 18x7.5 +44 |
| 18x8.5 +44 |
| 20x8.5 +44 |
| 22x9 +44 |
Widths and offsets with Verified Fitment on the 2024-2026 Ford F-150: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-23" | 7.5" | +4 to +54 |
| 17-23" | 8" | +10 to +60 |
| 17-23" | 8.5" | +17 to +56 |
| 17-23" | 9" | +23 to +49 |
| 17-23" | 9.5" | +30 to +43 |
| 17-23" | 10" | +36 to +37 |
Wider still: 17x10.5 +22 to +36; 17x11 +28 to +30; 18x10.5 +22 to +36; 18x11 +28 to +30; 19x10.5 +22 to +36; 19x11 +28 to +30… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 20-23" | 8.5" | +17 to +54 |
| 20-23" | 9" | +23 to +49 |
| 20-23" | 9.5" | +30 to +43 |
| 20-23" | 10" | +36 to +37 |
Wider still: 20x10.5 +22 to +36; 20x11 +28 to +30; 21x10.5 +22 to +36; 21x11 +28 to +30; 22x10.5 +22 to +36; 22x11 +28 to +30… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 18-23" | 7.5" | +4 to +54 |
| 18-23" | 8" | +10 to +60 |
| 18-23" | 8.5" | +17 to +56 |
| 18-23" | 9" | +23 to +49 |
| 18-23" | 9.5" | +30 to +43 |
| 18-23" | 10" | +36 to +37 |
Wider still: 18x10.5 +22 to +36; 18x11 +28 to +30; 19x10.5 +22 to +36; 19x11 +28 to +30; 20x10.5 +22 to +36; 20x11 +28 to +30… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 18-23" | 7.5" | +4 to +44 |
| 18-23" | 8" | +10 to +50 |
| 18-23" | 8.5" | +17 to +56 |
| 18-23" | 9" | +23 to +49 |
| 18-23" | 9.5" | +30 to +43 |
| 18-23" | 10" | +36 to +37 |
Wider still: 18x10.5 +22 to +36; 18x11 +28 to +30; 19x10.5 +22 to +36; 19x11 +28 to +30; 20x10.5 +22 to +36; 20x11 +28 to +30… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 22-23" | 9" | +23 to +49 |
| 22-23" | 9.5" | +30 to +43 |
| 22-23" | 10" | +36 to +37 |
Wider still: 22x10.5 +22 to +36; 22x11 +28 to +30; 23x10.5 +22 to +36; 23x11 +28 to +30 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2024-2026 Ford F-150 (P702) uses a 6X135 bolt pattern and a 87.1 mm center bore.
Factory sizes: 17x7.5 +44; 17x8.5 +34; 18x7.5 +34; 18x7.5 +44; 18x8.5 +44; 20x8.5 +44; 22x9 +44.
Bolt-on sizes run from 17" to 23" in diameter; see the size table for the offset range at each width.