Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford F-150 built from 2009 to 2014 (XL, STX, XLT, FX2, FX4, Lariat, King Ranch, Platinum, Harley-Davidson, Limited).
Every 2009-2014 Ford F-150 uses a 6X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x2.0. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford F-150 (P415) and the model years each was sold. All of them share the 6X135 bolt pattern.
| Submodel | Years |
|---|---|
| XL | 2009-2014 |
| STX | 2009-2014 |
| XLT | 2009-2014 |
| FX2 | 2009-2014 |
| FX4 | 2009-2014 |
| Lariat | 2009-2014 |
| King Ranch | 2009-2014 |
| Platinum | 2009-2014 |
| Harley-Davidson | 2009-2014 |
| Limited | 2013-2014 |
Wheel sizes Ford fitted to the 2009-2014 Ford F-150 from the factory. Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +44 |
| 17x8.5 +34 |
| 18x7.5 +44 |
| 20x8.5 +44 |
| 22x9 +44 |
Widths and offsets with Verified Fitment on the 2009-2014 Ford F-150: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | +4 to +52 |
| 17-20" | 8" | +10 to +46 |
| 17-20" | 8.5" | +17 to +39 |
| 17-20" | 9" | +23 to +33 |
Wider still: 17x10 +15 to +26; 18x10 +15 to +26; 19x10 +15 to +26; 20x10 +15 to +26 fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).
The 2009-2014 Ford F-150 (P415) uses a 6X135 bolt pattern and a 87.1 mm center bore.
Factory sizes: 17x7.5 +44; 17x8.5 +34; 18x7.5 +44; 20x8.5 +44; 22x9 +44.
Its wheel fasteners use a M14x2.0 thread.
Bolt-on sizes run from 17" to 20" in diameter; see the size table for the offset range at each width.