Ford F-150 (P221) 2004-2008 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes and the aftermarket widths and offsets that bolt on to the Ford F-150 built from 2004 to 2008 (XL, STX, XLT, FX4, FX2, Lariat, King Ranch, Harley-Davidson, Limited).

Fitment specs

Bolt pattern6X135
Center bore87.1 mm
Lug threadM14x2.0
Model years2004-2008
GenerationP221

Every 2004-2008 Ford F-150 uses a 6X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x2.0. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Ford F-150 (P221) and the model years each was sold. All of them share the 6X135 bolt pattern.

SubmodelYears
XL2004-2008
STX2004-2008
XLT2004-2008
FX42004-2008
FX22007-2008
Lariat2004-2008
King Ranch2004-2008
Harley-Davidson2004-2008
Limited2008

Factory wheel sizes

Wheel sizes Ford fitted to the 2004-2008 Ford F-150 from the factory. Offsets are ET in millimeters.

Factory size
17x7.5 +44
18x7.5 +44
20x8.5 +44
22x9 +44

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2004-2008 Ford F-150: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthOffset range
17-24"7.5"+27 to +49
17-24"8"+33 to +43

Wider still: 17x9 +25 to +36; 18x9 +25 to +36; 19x9 +25 to +36; 20x9 +25 to +36; 21x9 +25 to +36; 22x9 +25 to +36… fit with modifications (leveling kit (about 2 in) or lift for larger tires, trim front bumper valance, mud flaps and plastic fender liner, body mount chop (bmc) for very low / negative offsets).

FAQ

What is the bolt pattern of the 2004-2008 Ford F-150?

The 2004-2008 Ford F-150 (P221) uses a 6X135 bolt pattern and a 87.1 mm center bore.

What size wheels came on the 2004-2008 Ford F-150 from the factory?

Factory sizes: 17x7.5 +44; 18x7.5 +44; 20x8.5 +44; 22x9 +44.

What lug thread size does the 2004-2008 Ford F-150 use?

Its wheel fasteners use a M14x2.0 thread.

What aftermarket wheel sizes fit the 2004-2008 Ford F-150 without modifications?

Bolt-on sizes run from 17" to 24" in diameter; see the size table for the offset range at each width.