Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Ford F-150 built from 2015 to 2020 (XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor).
Every 2015-2020 Ford F-150 uses a 6X135 bolt pattern with a 87.1 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 87.1 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Ford F-150 (P552) and the model years each was sold. All of them share the 6X135 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| XL | 2015-2020 | See factory sizes below |
| XLT | 2015-2020 | See factory sizes below |
| Lariat | 2015-2020 | See factory sizes below |
| King Ranch | 2015-2020 | See factory sizes below |
| Platinum | 2015-2020 | 20x8.5 +44 |
| Limited | 2016-2020 | 22x9 +44 |
| Raptor | 2017-2020 | 17x7.5 +44 17x8.5 +34 |
Wheel sizes Ford fitted to the 2015-2020 Ford F-150 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7.5 +44 |
| 17x8.5 +34 |
| 17x8.5 +44 |
| 18x7.5 +34 |
| 18x7.5 +44 |
| 18x8.5 +44 |
| 18x9 +44 |
| 20x8.5 +44 |
| 21x8.5 +44 |
| 22x9 +44 |
Widths and offsets with Verified Fitment on the 2015-2020 Ford F-150: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 17-20" | 7.5" | -24 to +52 |
| 17-20" | 8" | -18 to +46 |
| 17-20" | 8.5" | -12 to +40 |
| 17-20" | 9" | -5 to +33 |
| 17-20" | 9.5" | +1 to +27 |
| 17-20" | 10" | +7 to +21 |
Wider still: 17x10.5 -30 to +14; 17x11 -30 to +8; 17x11.5 -29 to +1; 17x12 -23 to -5; 18x10.5 -30 to +14; 18x11 -30 to +8… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 20" | 8.5" | -7 to +44 |
| 20" | 9" | +0 to +37 |
| 20" | 9.5" | +6 to +31 |
| 20" | 10" | +12 to +25 |
Wider still: 20x10.5 -30 to +18; 20x11 -30 to +12; 20x11.5 -24 to +5; 20x12 -18 to -1; 21x10.5 -30 to +18; 21x11 -30 to +12… fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
| Diameter | Width | Offset range |
|---|---|---|
| 22" | 9" | +0 to +44 |
| 22" | 9.5" | +6 to +37 |
| 22" | 10" | +12 to +31 |
Wider still: 22x10.5 -30 to +24; 22x11 -30 to +18; 22x11.5 -24 to +12; 22x12 -18 to +5 fit with modifications (roll the fender lips, add negative camber (camber bolts or arms), wheel alignment after install).
The 2015-2020 Ford F-150 (P552) uses a 6X135 bolt pattern and a 87.1 mm center bore.
Factory sizes: 17x7.5 +44; 17x8.5 +34; 17x8.5 +44; 18x7.5 +34; 18x7.5 +44; 18x8.5 +44; 18x9 +44; 20x8.5 +44; 21x8.5 +44; 22x9 +44.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 22" in diameter; see the size table for the offset range at each width.