Porsche 911 (964) 1989-1994 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche 911 built from 1989 to 1994 (Carrera 4, Carrera 2, Targa, Cabriolet, Turbo, RS America, America Roadster, Speedster).

Fitment specs

Bolt pattern5X130
Center bore71.6 mm
Lug threadM14x1.5
Model years1989-1994
Generation964

Every 1989-1994 Porsche 911 uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche 911 (964) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYearsFactory wheel sizes
Carrera 41989-1994See factory sizes below
Carrera 21990-1994See factory sizes below
Targa1990-1994See factory sizes below
Cabriolet1990-1994See factory sizes below
Turbo1991-199417x7 +55 front / 17x8 +52 rear
17x7 +55 front / 17x9 +55 rear
17x7 +55 front / 17x9.5 +68 rear
17x8 +52
17x9 +55
17x9.5 +68
RS America1993-1994See factory sizes below
America Roadster1992-1993See factory sizes below
Speedster199417x7 +55 front / 17x8 +52 rear
17x7 +55 front / 17x9 +55 rear
17x7 +55 front / 17x9.5 +68 rear
17x8 +52
17x9 +55
17x9.5 +68

Factory wheel sizes

Wheel sizes Porsche fitted to the 1989-1994 Porsche 911 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x6 +52 front / 16x7 +55 rear
16x6 +52 front / 16x8 +52 rear
16x7 +55
16x8 +52.3
17x7 +55 front / 17x8 +52 rear
17x7 +55 front / 17x9 +55 rear
17x7 +55 front / 17x9.5 +68 rear
17x8 +52
17x9 +55
17x9.5 +68
18x7 +55 front / 18x9.5 +65 rear
18x9.5 +65
18x10 +61
19x10 +60

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1989-1994 Porsche 911: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Carrera 4, Carrera 2, Targa, Cabriolet, RS America, America Roadster

DiameterWidthFront offsetRear offset
16-18"6"+35 to +57—
16-18"6.5"+41 to +51—
16-18"8"—+35 to +57
16-18"8.5"—+41 to +51

Wider still: 16x9.5 front — / rear +33 to +44; 17x9.5 front — / rear +33 to +44; 18x9.5 front — / rear +33 to +44 fit with modifications (roll rear fender lips, longer wheel studs when running spacers, camber adjustment at strut top / rear spring plate).

Turbo, Speedster

DiameterWidthFront offsetRear offset
17-18"7"+48 to +55—
17-18"8"—+35 to +57
17-18"8.5"—+41 to +51

Wider still: 17x9.5 front — / rear +33 to +44; 18x9.5 front — / rear +33 to +44 fit with modifications (roll rear fender lips, longer wheel studs when running spacers, camber adjustment at strut top / rear spring plate).

FAQ

What is the bolt pattern of the 1989-1994 Porsche 911?

The 1989-1994 Porsche 911 (964) uses a 5X130 bolt pattern and a 71.6 mm center bore.

What size wheels came on the 1989-1994 Porsche 911 from the factory?

Factory sizes: 16x6 +52 front / 16x7 +55 rear; 16x6 +52 front / 16x8 +52 rear; 16x7 +55; 16x8 +52.3; 17x7 +55 front / 17x8 +52 rear; 17x7 +55 front / 17x9 +55 rear; 17x7 +55 front / 17x9.5 +68 rear; 17x8 +52; 17x9 +55; 17x9.5 +68; 18x7 +55 front / 18x9.5 +65 rear; 18x9.5 +65; 18x10 +61; 19x10 +60.

What lug thread size does the 1989-1994 Porsche 911 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 1989-1994 Porsche 911 without modifications?

Bolt-on sizes run from 16" to 18" in diameter; see the size table for the offset range at each width.