Porsche 911 (997) 2005-2012 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche 911 built from 2005 to 2012 (Carrera, Carrera S, Carrera 4, Carrera 4S, Targa 4, Targa 4S, Turbo, GT3, GT3 RS, GT2).

Fitment specs

Bolt pattern5X130
Center bore71.6 mm
Lug threadM14x1.5
Model years2005-2012
Generation997

Every 2005-2012 Porsche 911 uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche 911 (997) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYearsFactory wheel sizes
Carrera2005-201218x8 +57 front / 18x10 +58 rear
18x8 +57 front / 18x10.5 +60 rear
19x8 +57 front / 19x10.5 +67 rear
19x8 +57 front / 19x11 +67 rear
19x8 +57 front / 19x11 +69 rear
19x8.5 +55 front / 19x11.5 +67 rear
Carrera S2005-201218x10 +58
18x10.5 +60
19x10.5 +67
19x11 +67
19x11.5 +67
Carrera 42006-201218x8 +57 front / 18x11 +51 rear
18x11 +51
19x8 +57 front / 19x11 +51 rear
19x8.5 +55 front / 19x11.5 +50 rear
19x11 +51
19x11.5 +50
Carrera 4S2006-201218x11 +51
19x11 +51
19x11.5 +50
Targa 42007-201218x11 +51
19x11 +51
19x11.5 +50
Targa 4S2007-201218x11 +51
19x11 +51
19x11.5 +50
Turbo2007-200919x11 +51
19x11.5 +50
GT32007-200919x12 +63
19x12 +68
20x12 +60
GT3 RS2007-200919x12 +48
19x12 +51
20x12 +45
20x12 +50
GT22008-200919x12 +51
20x12 +50

Factory wheel sizes

Wheel sizes Porsche fitted to the 2005-2012 Porsche 911 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +57 front / 18x10 +58 rear
18x8 +57 front / 18x10.5 +60 rear
18x8 +57 front / 18x11 +51 rear
18x10 +58
18x10.5 +60
18x11 +51
19x8 +57 front / 19x10.5 +67 rear
19x8 +57 front / 19x11 +67 rear
19x8 +57 front / 19x11 +69 rear
19x8 +57 front / 19x11 +51 rear
19x8.5 +55 front / 19x11.5 +50 rear
19x8.5 +55 front / 19x11.5 +67 rear
19x10.5 +67
19x11 +51
19x11 +67
19x11.5 +50
19x11.5 +67
19x12 +48
19x12 +51
19x12 +63
19x12 +68
20x11.5 +55
20x12 +45
20x12 +50
20x12 +60

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2005-2012 Porsche 911: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Carrera

DiameterWidthFront offsetRear offset
18-19"8"+40 to +62—
18-19"8.5"+46 to +56—
18-19"10"—+21 to +68
18-19"10.5"—+28 to +65
18-19"11"—+34 to +59
18-19"11.5"—+40 to +53

Wider still: 18x12.5 front — / rear +32 to +46; 18x13 front — / rear +39 to +40; 19x12.5 front — / rear +32 to +46; 19x13 front — / rear +39 to +40 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Carrera S

DiameterWidthFront offsetRear offset
18-19"10"+58+21 to +68
18-19"10.5"—+28 to +65
18-19"11"—+34 to +59
18-19"11.5"—+40 to +53

Wider still: 18x12.5 front — / rear +32 to +46; 18x13 front — / rear +39 to +40; 19x12.5 front — / rear +32 to +46; 19x13 front — / rear +39 to +40 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Carrera 4

DiameterWidthFront offsetRear offset
18-19"8"+40 to +62—
18-19"8.5"+46 to +56—
18-19"11"—+34 to +59
18-19"11.5"—+40 to +53

Wider still: 18x12.5 front — / rear +32 to +46; 18x13 front — / rear +39 to +40; 19x12.5 front — / rear +32 to +46; 19x13 front — / rear +39 to +40 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Carrera 4S, Targa 4, Targa 4S

DiameterWidthFront offsetRear offset
18-19"11"+51+34 to +59
18-19"11.5"—+40 to +53

Wider still: 18x12.5 front — / rear +32 to +46; 18x13 front — / rear +39 to +40; 19x12.5 front — / rear +32 to +46; 19x13 front — / rear +39 to +40 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Turbo

DiameterWidthFront offsetRear offset
19"11"+51+34 to +59
19"11.5"—+40 to +53

Wider still: 19x12.5 front — / rear +32 to +46; 19x13 front — / rear +39 to +40 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

GT3

DiameterWidthFront offsetRear offset
19-20"12"+63+47 to +63

Wider still: 19x12.5 front — / rear +32 to +56; 19x13 front — / rear +39 to +50; 20x12.5 front — / rear +32 to +56; 20x13 front — / rear +39 to +50 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

GT3 RS

DiameterWidthFront offsetRear offset
19-20"12"+48+47 to +48

Wider still: 19x12.5 front — / rear +32 to +46; 19x13 front — / rear +39 to +40; 20x12.5 front — / rear +32 to +46; 20x13 front — / rear +39 to +40 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

GT2

DiameterWidthFront offsetRear offset
19-20"12"+51+47 to +51

Wider still: 19x12.5 front — / rear +32 to +46; 19x13 front — / rear +39 to +40; 20x12.5 front — / rear +32 to +46; 20x13 front — / rear +39 to +40 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

FAQ

What is the bolt pattern of the 2005-2012 Porsche 911?

The 2005-2012 Porsche 911 (997) uses a 5X130 bolt pattern and a 71.6 mm center bore.

What size wheels came on the 2005-2012 Porsche 911 from the factory?

Factory sizes: 18x8 +57 front / 18x10 +58 rear; 18x8 +57 front / 18x10.5 +60 rear; 18x8 +57 front / 18x11 +51 rear; 18x10 +58; 18x10.5 +60; 18x11 +51; 19x8 +57 front / 19x10.5 +67 rear; 19x8 +57 front / 19x11 +67 rear; 19x8 +57 front / 19x11 +69 rear; 19x8 +57 front / 19x11 +51 rear; 19x8.5 +55 front / 19x11.5 +50 rear; 19x8.5 +55 front / 19x11.5 +67 rear; 19x10.5 +67; 19x11 +51; 19x11 +67; 19x11.5 +50; 19x11.5 +67; 19x12 +48; 19x12 +51; 19x12 +63; 19x12 +68; 20x11.5 +55; 20x12 +45; 20x12 +50; 20x12 +60.

What lug thread size does the 2005-2012 Porsche 911 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2005-2012 Porsche 911 without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.