Porsche 911 (992) 2020-2024 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche 911 built from 2020 to 2024 (Carrera, Carrera 4, Carrera S, Carrera 4S, Targa 4, Targa 4S, Carrera GTS, Carrera 4 GTS, Targa 4 GTS, Carrera T).

Fitment specs

Bolt pattern5X130
Center bore71.6 mm
Lug threadM14x1.5
Model years2020-2024
Generation992

Every 2020-2024 Porsche 911 uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche 911 (992) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYearsFactory wheel sizes
Carrera2020-202419x8.5 +52 front / 20x11.5 +67 rear
Carrera 42020-202419x8.5 +52 front / 20x11.5 +67 rear
Carrera S2020-202421x11.5 +67
Carrera 4S2020-202421x11.5 +67
Targa 42021-202420x11.5 +67
Targa 4S2021-202420x11.5 +67
Carrera GTS2022-202421x11.5 +67
Carrera 4 GTS2022-202421x11.5 +67
Targa 4 GTS2022-202420x11.5 +67
Carrera T2023-202420x8.5 +53 front / 20x11.5 +67 rear
20x8.5 +53 front / 21x11.5 +67 rear

Factory wheel sizes

Wheel sizes Porsche fitted to the 2020-2024 Porsche 911 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x8 +38 front / 20x11.5 +63 rear
19x8.5 +52 front / 20x11.5 +67 rear
20x8.5 +53 front / 20x11.5 +67 rear
20x8.5 +53 front / 21x11 +66 rear
20x8.5 +53 front / 21x11.5 +67 rear
20x9 +41 front / 21x11.5 +67 rear
20x11.5 +67
21x11.5 +67
21x12 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2020-2024 Porsche 911: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

Carrera, Carrera 4

DiameterWidthFront offsetRear offset
19-21"8.5"+18 to +58—
19-21"9"+24 to +52—
19-21"9.5"+30 to +46—
19-21"10"+37 to +39—
20-21"11.5"—+22 to +72
20-21"12"—+28 to +66
20-21"12.5"—+34 to +60
20-21"13"—+41 to +53

Wider still: 20x13.5 front — / rear +26 to +53; 20x14 front — / rear +33 to +47; 21x13.5 front — / rear +26 to +53; 21x14 front — / rear +33 to +47 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Carrera S, Carrera 4S, Carrera GTS, Carrera 4 GTS

DiameterWidthFront offsetRear offset
21"11.5"+56 to +67+22 to +72
21"12"—+28 to +66
21"12.5"—+34 to +60
21"13"—+41 to +53

Wider still: 21x13.5 front — / rear +26 to +53; 21x14 front — / rear +33 to +47 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Targa 4, Targa 4S, Targa 4 GTS

DiameterWidthFront offsetRear offset
20-21"11.5"+56 to +67+22 to +72
20-21"12"—+28 to +66
20-21"12.5"—+34 to +60
20-21"13"—+41 to +53

Wider still: 20x13.5 front — / rear +26 to +53; 20x14 front — / rear +33 to +47; 21x13.5 front — / rear +26 to +53; 21x14 front — / rear +33 to +47 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

Carrera T

DiameterWidthFront offsetRear offset
20-21"8.5"+18 to +58—
20-21"9"+24 to +52—
20-21"9.5"+30 to +46—
20-21"10"+37 to +39—
20-21"11.5"—+22 to +72
20-21"12"—+28 to +66
20-21"12.5"—+34 to +60
20-21"13"—+41 to +53

Wider still: 20x13.5 front — / rear +26 to +53; 20x14 front — / rear +33 to +47; 21x13.5 front — / rear +26 to +53; 21x14 front — / rear +33 to +47 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

FAQ

What is the bolt pattern of the 2020-2024 Porsche 911?

The 2020-2024 Porsche 911 (992) uses a 5X130 bolt pattern and a 71.6 mm center bore.

What size wheels came on the 2020-2024 Porsche 911 from the factory?

Factory sizes: 19x8 +38 front / 20x11.5 +63 rear; 19x8.5 +52 front / 20x11.5 +67 rear; 20x8.5 +53 front / 20x11.5 +67 rear; 20x8.5 +53 front / 21x11 +66 rear; 20x8.5 +53 front / 21x11.5 +67 rear; 20x9 +41 front / 21x11.5 +67 rear; 20x11.5 +67; 21x11.5 +67; 21x12 +45.

What lug thread size does the 2020-2024 Porsche 911 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2020-2024 Porsche 911 without modifications?

Bolt-on sizes run from 19" to 21" in diameter; see the size table for the offset range at each width.