Porsche 911 (992) 2025-2026 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche 911 built from 2025 to 2026 (Carrera, Carrera T, Carrera S, Carrera 4S, Targa 4S, Carrera GTS, Carrera 4 GTS, Targa 4 GTS).

Fitment specs

Bolt pattern5X130
Center bore71.6 mm
Lug threadM14x1.5
Model years2025-2026
Generation992

Every 2025-2026 Porsche 911 uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Porsche 911 (992) and the model years each was sold. All of them share the 5X130 bolt pattern.

SubmodelYearsFactory wheel sizes
Carrera2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
Carrera T2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
Carrera S2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
Carrera 4S2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
Targa 4S2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
Carrera GTS2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
Carrera 4 GTS2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
Targa 4 GTS2025-202620x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear

Factory wheel sizes

Wheel sizes Porsche fitted to the 2025-2026 Porsche 911 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
19x8.5 +52 front / 20x11 +80 rear
19x8.5 +52 front / 20x11.5 +81 rear
20x8.5 +50 front / 21x11 +82 rear
20x8.5 +50 front / 21x11.5 +79 rear
21x11 +82
21x11.5 +79

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2025-2026 Porsche 911: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

DiameterWidthFront offsetRear offset
20-21"8.5"+33 to +57—
20-21"9"+39 to +51—
21"11"—+55 to +75
21"11.5"—+62 to +75
21"12"—+68 to +75

Wider still: 21x13 front — / rear +60 to +73; 21x13.5 front — / rear +67 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).

FAQ

What is the bolt pattern of the 2025-2026 Porsche 911?

The 2025-2026 Porsche 911 (992) uses a 5X130 bolt pattern and a 71.6 mm center bore.

What size wheels came on the 2025-2026 Porsche 911 from the factory?

Factory sizes: 19x8.5 +52 front / 20x11 +80 rear; 19x8.5 +52 front / 20x11.5 +81 rear; 20x8.5 +50 front / 21x11 +82 rear; 20x8.5 +50 front / 21x11.5 +79 rear; 21x11 +82; 21x11.5 +79.

What lug thread size does the 2025-2026 Porsche 911 use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2025-2026 Porsche 911 without modifications?

Bolt-on sizes run from 20" to 21" in diameter; see the size table for the offset range at each width.