Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Porsche 911 built from 1999 to 2005 (Carrera, Carrera Cabriolet, Carrera 4, Targa, Carrera 4S, Turbo, Turbo S, GT2, GT3, 40th Anniversary).
Every 1999-2005 Porsche 911 uses a 5X130 bolt pattern with a 71.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 71.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Porsche 911 (996) and the model years each was sold. All of them share the 5X130 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| Carrera | 1999-2004 | See factory sizes below |
| Carrera Cabriolet | 1999-2004 | 17x7 +50 front / 17x9 +55 rear 17x7 +55 front / 17x8.5 +50 rear 17x7 +55 front / 17x9 +55 rear 17x8.5 +50 17x9 +55 |
| Carrera 4 | 1999-2004 | See factory sizes below |
| Targa | 2002-2005 | 17x7 +50 front / 17x9 +55 rear 17x9 +55 |
| Carrera 4S | 2002-2005 | See factory sizes below |
| Turbo | 2001-2005 | See factory sizes below |
| Turbo S | 2005 | See factory sizes below |
| GT2 | 2002-2005 | 18x11 +63 18x12 +45 |
| GT3 | 2004-2005 | 18x8 +50 front / 18x11 +63 rear 18x11 +63 18x12 +45 |
| 40th Anniversary | 2004 | See factory sizes below |
Wheel sizes Porsche fitted to the 1999-2005 Porsche 911 from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 17x7 +55 front / 17x8.5 +50 rear |
| 17x7 +50 front / 17x9 +55 rear |
| 17x7 +55 front / 17x9 +55 rear |
| 17x8.5 +50 |
| 17x9 +55 |
| 18x7.5 +50 front / 18x10 +65 rear |
| 18x8 +50 front / 18x10 +65 rear |
| 18x8 +52 front / 18x10 +65 rear |
| 18x8 +50 front / 18x11 +63 rear |
| 18x10 +47 |
| 18x10 +65 |
| 18x11 +45 |
| 18x11 +63 |
| 18x12 +45 |
Widths and offsets with Verified Fitment on the 1999-2005 Porsche 911: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-18" | 7" | +14 to +65 | — |
| 17-18" | 7.5" | +20 to +68 | — |
| 17-18" | 8" | +26 to +62 | — |
| 17-18" | 8.5" | +33 to +55 | — |
| 17-18" | 9" | +39 to +49 | +17 to +65 |
| 17-18" | 9.5" | — | +23 to +71 |
| 17-18" | 10" | — | +30 to +70 |
| 17-18" | 10.5" | — | +36 to +64 |
| 17-18" | 11" | — | +42 to +58 |
Wider still: 17x11.5 front — / rear +28 to +57; 17x12 front — / rear +35 to +51; 18x11.5 front — / rear +28 to +57; 18x12 front — / rear +35 to +51 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-18" | 7" | +14 to +60 | — |
| 17-18" | 7.5" | +20 to +66 | — |
| 17-18" | 8" | +26 to +62 | — |
| 17-18" | 8.5" | +33 to +55 | — |
| 17-18" | 9" | +39 to +49 | +17 to +65 |
| 17-18" | 9.5" | — | +23 to +71 |
| 17-18" | 10" | — | +30 to +70 |
| 17-18" | 10.5" | — | +36 to +64 |
| 17-18" | 11" | — | +42 to +58 |
Wider still: 17x11.5 front — / rear +28 to +57; 17x12 front — / rear +35 to +51; 18x11.5 front — / rear +28 to +57; 18x12 front — / rear +35 to +51 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18" | 11" | +63 | +42 to +63 |
Wider still: 18x11.5 front — / rear +28 to +57; 18x12 front — / rear +35 to +51 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18" | 8" | +26 to +60 | — |
| 18" | 8.5" | +33 to +55 | — |
| 18" | 9" | +39 to +49 | — |
| 18" | 11" | — | +42 to +63 |
Wider still: 18x11.5 front — / rear +28 to +57; 18x12 front — / rear +35 to +51 fit with modifications (roll rear fender lips, rear camber/toe adjustment for extra negative camber, hub-centric rings (71.6 mm) if wheel bore is larger, longer wheel bolts when running spacers).
The 1999-2005 Porsche 911 (996) uses a 5X130 bolt pattern and a 71.6 mm center bore.
Factory sizes: 17x7 +55 front / 17x8.5 +50 rear; 17x7 +50 front / 17x9 +55 rear; 17x7 +55 front / 17x9 +55 rear; 17x8.5 +50; 17x9 +55; 18x7.5 +50 front / 18x10 +65 rear; 18x8 +50 front / 18x10 +65 rear; 18x8 +52 front / 18x10 +65 rear; 18x8 +50 front / 18x11 +63 rear; 18x10 +47; 18x10 +65; 18x11 +45; 18x11 +63; 18x12 +45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 17" to 18" in diameter; see the size table for the offset range at each width.