Mercedes-Benz S-Class (W140) 1999 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz S-Class built from 1999 to 1999 (S320, S420, S500, S600).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years1999
GenerationW140

Every 1999 Mercedes-Benz S-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz S-Class (W140) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
S320199916x7.5 +46
16x7.5 +51
17x7.5 +46
17x7.5 +51
18x8 +44
18x8 +44 front / 18x9 +44 rear
18x8.5 +44
18x8.5 +44 front / 18x9.5 +46 rear
S420199916x7.5 +51
S500199917x7.5 +46
17x7.5 +51
18x8 +44
18x8.5 +44
18x9 +46
18x9.5 +46
19x8.5 +40
S600199918x8 +44
18x8.5 +44
18x9 +46
18x9.5 +46
19x10 +45

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 1999 Mercedes-Benz S-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
16x7.5 +46
16x7.5 +51
17x7.5 +46
17x7.5 +51
18x8 +44
18x8 +44 front / 18x9 +46 rear
18x8 +44 front / 18x9 +44 rear
18x8.5 +44
18x8.5 +44 front / 18x9.5 +46 rear
18x9 +44
18x9 +46
18x9.5 +46
19x8.5 +40
19x10 +45

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 1999 Mercedes-Benz S-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

S320

DiameterWidthFront offsetRear offset
16-19"7.5"+21 to +56+8 to +56
16-19"8"+27 to +49+14 to +62
16-19"8.5"+33 to +43+21 to +58
16-19"9"—+27 to +51
16-19"9.5"—+33 to +45

Wider still: 16x10.5 front — / rear +25 to +38; 16x11 front — / rear +31 to +32; 17x10.5 front — / rear +25 to +38; 17x11 front — / rear +31 to +32; 18x10.5 front — / rear +25 to +38; 18x11 front — / rear +31 to +32… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

S420

DiameterWidthFront offsetRear offset
16-19"7.5"+21 to +56+8 to +61
16-19"8"+27 to +49+14 to +64
16-19"8.5"+33 to +43+21 to +58
16-19"9"—+27 to +51
16-19"9.5"—+33 to +45

Wider still: 16x10.5 front — / rear +25 to +38; 16x11 front — / rear +31 to +32; 17x10.5 front — / rear +25 to +38; 17x11 front — / rear +31 to +32; 18x10.5 front — / rear +25 to +38; 18x11 front — / rear +31 to +32… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

S500

DiameterWidthFront offsetRear offset
17-19"7.5"+21 to +56+8 to +56
17-19"8"+27 to +49+14 to +62
17-19"8.5"+33 to +43+21 to +58
17-19"9"—+27 to +51
17-19"9.5"—+33 to +45

Wider still: 17x10.5 front — / rear +25 to +38; 17x11 front — / rear +31 to +32; 18x10.5 front — / rear +25 to +38; 18x11 front — / rear +31 to +32; 19x10.5 front — / rear +25 to +38; 19x11 front — / rear +31 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

S600

DiameterWidthFront offsetRear offset
18-19"8"+27 to +49+14 to +54
18-19"8.5"+33 to +43+21 to +58
18-19"9"—+27 to +51
18-19"9.5"—+33 to +45

Wider still: 18x10.5 front — / rear +25 to +38; 18x11 front — / rear +31 to +32; 19x10.5 front — / rear +25 to +38; 19x11 front — / rear +31 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 1999 Mercedes-Benz S-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

S320

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

S420

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

S500

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

S600

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 1999 Mercedes-Benz S-Class?

The 1999 Mercedes-Benz S-Class (W140) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 1999 Mercedes-Benz S-Class from the factory?

Factory sizes: 16x7.5 +46; 16x7.5 +51; 17x7.5 +46; 17x7.5 +51; 18x8 +44; 18x8 +44 front / 18x9 +46 rear; 18x8 +44 front / 18x9 +44 rear; 18x8.5 +44; 18x8.5 +44 front / 18x9.5 +46 rear; 18x9 +44; 18x9 +46; 18x9.5 +46; 19x8.5 +40; 19x10 +45.

What lug thread size does the 1999 Mercedes-Benz S-Class use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 1999 Mercedes-Benz S-Class without modifications?

Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.