Mercedes-Benz S-Class (W222) 2014-2020 Wheel Fitment Guide

Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz S-Class built from 2014 to 2020 (S450, S450 4MATIC, S550, S550 4MATIC, S550e, S560, S560 4MATIC, S560e, S600, AMG S63, AMG S65, Maybach S550, Maybach S560, Maybach S600, Maybach S650).

Fitment specs

Bolt pattern5X112
Center bore66.6 mm
Lug threadM14x1.5
Model years2014-2020
GenerationW222

Every 2014-2020 Mercedes-Benz S-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.

Years & submodels

US-market submodels of the Mercedes-Benz S-Class (W222) and the model years each was sold. All of them share the 5X112 bolt pattern.

SubmodelYearsFactory wheel sizes
S4502018-202018x8 +41
18x8 +41 front / 18x9.5 +43.5 rear
19x8.5 +36
19x8.5 +38
19x8.5 +36 front / 19x9.5 +43.5 rear
20x8.5 +36 front / 20x9.5 +43.5 rear
20x8.5 +38 front / 20x9.5 +38 rear
S450 4MATIC2018-2020See factory sizes below
S5502014-201718x8 +41
18x8 +41 front / 18x9.5 +43.5 rear
19x8.5 +36
19x8.5 +38
19x8.5 +36 front / 19x9.5 +43.5 rear
20x8.5 +36 front / 20x9.5 +43.5 rear
20x8.5 +38 front / 20x9.5 +38 rear
S550 4MATIC2014-2017See factory sizes below
S550e2015-201719x8.5 +36
19x8.5 +38
19x8.5 +36 front / 19x9.5 +43.5 rear
19x8.5 +38 front / 19x9.5 +38 rear
20x8.5 +36 front / 20x9.5 +43.5 rear
20x8.5 +38 front / 20x9.5 +38 rear
S5602018-202019x8.5 +36
19x8.5 +38
19x8.5 +36 front / 19x9.5 +43.5 rear
19x8.5 +38 front / 19x9.5 +38 rear
20x8.5 +36 front / 20x9.5 +43.5 rear
20x8.5 +38 front / 20x9.5 +38 rear
S560 4MATIC2018-2020See factory sizes below
S560e2019-202019x8.5 +36
19x8.5 +38
19x8.5 +36 front / 19x9.5 +43.5 rear
19x8.5 +38 front / 19x9.5 +38 rear
S6002015-201719x8.5 +36
19x8.5 +38
19x9.5 +38
19x9.5 +43.5
20x9.5 +38
20x9.5 +43.5
AMG S632014-202019x8.5 +38
19x8.5 +38 front / 19x9.5 +38 rear
20x8.5 +39
20x8.5 +38 front / 20x9.5 +38 rear
AMG S652015-202019x8.5 +39
19x8.5 +39 front / 19x9.5 +39 rear
19x9.5 +39
20x8.5 +39
20x8.5 +39 front / 20x9.5 +39 rear
20x9.5 +39
Maybach S5502016-2017See factory sizes below
Maybach S5602018-2020See factory sizes below
Maybach S6002016-2017See factory sizes below
Maybach S6502018-2020See factory sizes below

Factory wheel sizes

Wheel sizes Mercedes-Benz fitted to the 2014-2020 Mercedes-Benz S-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.

Factory size
18x8 +41
18x8 +41 front / 18x9.5 +43.5 rear
19x8.5 +36
19x8.5 +38
19x8.5 +36 front / 19x9.5 +43.5 rear
19x8.5 +38 front / 19x9.5 +38 rear
19x9.5 +38
19x9.5 +43.5
20x8.5 +36 front / 20x9.5 +43.5 rear
20x8.5 +38 front / 20x9.5 +38 rear
20x9.5 +38
20x9.5 +43.5

Aftermarket sizes that bolt on

Widths and offsets with Verified Fitment on the 2014-2020 Mercedes-Benz S-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.

S450, S550

DiameterWidthFront offsetRear offset
18-20"8"+7 to +51—
18-20"8.5"+14 to +57+14 to +57
18-20"9"+20 to +55+20 to +55
18-20"9.5"+26 to +49+26 to +49
18-20"10"+33 to +43+33 to +43

Wider still: 18x11 front +25 to +36 / rear +25 to +36; 19x11 front +25 to +36 / rear +25 to +36; 20x11 front +25 to +36 / rear +25 to +36 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

S450 4MATIC, S550 4MATIC, S560 4MATIC, Maybach S550, Maybach S560, Maybach S600, Maybach S650

DiameterWidthFront offsetRear offset
18-20"8"+7 to +51—
18-20"8.5"+14 to +57—
18-20"9"+20 to +55—
18-20"9.5"+26 to +49+26 to +49
18-20"10"+33 to +43+33 to +43

Wider still: 18x11 front +25 to +36 / rear +25 to +36; 19x11 front +25 to +36 / rear +25 to +36; 20x11 front +25 to +36 / rear +25 to +36 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

S550e, S560, S560e, S600

DiameterWidthOffset range
19-20"8.5"+14 to +46
19-20"9"+20 to +52
19-20"9.5"+26 to +49
19-20"10"+33 to +43

Wider still: 19x11 +25 to +36; 20x11 +25 to +36 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

AMG S63

DiameterWidthOffset range
19-20"8.5"+14 to +48
19-20"9"+20 to +54
19-20"9.5"+26 to +49
19-20"10"+33 to +43

Wider still: 19x11 +25 to +36; 20x11 +25 to +36 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

AMG S65

DiameterWidthOffset range
19-20"8.5"+14 to +49
19-20"9"+20 to +55
19-20"9.5"+26 to +49
19-20"10"+33 to +43

Wider still: 19x11 +25 to +36; 20x11 +25 to +36 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).

Wheels in stock that fit

In-stock PG WHEELS sets in sizes with Verified Fitment for the 2014-2020 Mercedes-Benz S-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.

S450, S550

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

S450 4MATIC, S550 4MATIC, S560 4MATIC, Maybach S550, Maybach S560, Maybach S600, Maybach S650

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

S550e, S560, S560e, S600

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

AMG S63

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

AMG S65

Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)

FAQ

What is the bolt pattern of the 2014-2020 Mercedes-Benz S-Class?

The 2014-2020 Mercedes-Benz S-Class (W222) uses a 5X112 bolt pattern and a 66.6 mm center bore.

What size wheels came on the 2014-2020 Mercedes-Benz S-Class from the factory?

Factory sizes: 18x8 +41; 18x8 +41 front / 18x9.5 +43.5 rear; 19x8.5 +36; 19x8.5 +38; 19x8.5 +36 front / 19x9.5 +43.5 rear; 19x8.5 +38 front / 19x9.5 +38 rear; 19x9.5 +38; 19x9.5 +43.5; 20x8.5 +36 front / 20x9.5 +43.5 rear; 20x8.5 +38 front / 20x9.5 +38 rear; 20x9.5 +38; 20x9.5 +43.5.

What lug thread size does the 2014-2020 Mercedes-Benz S-Class use?

Its wheel fasteners use a M14x1.5 thread.

What aftermarket wheel sizes fit the 2014-2020 Mercedes-Benz S-Class without modifications?

Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.