Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz S-Class built from 2021 to 2026 (S500 4MATIC, S580 4MATIC, S580e, AMG S63 E Performance, Maybach S580, Maybach S680).
Every 2021-2026 Mercedes-Benz S-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz S-Class (W223) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| S500 4MATIC | 2021-2026 | See factory sizes below |
| S580 4MATIC | 2021-2026 | See factory sizes below |
| S580e | 2024-2026 | 19x8.5 +31 19x8.5 +31 front / 19x10 +48 rear |
| AMG S63 E Performance | 2024-2026 | See factory sizes below |
| Maybach S580 | 2021-2026 | See factory sizes below |
| Maybach S680 | 2022-2026 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2021-2026 Mercedes-Benz S-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 18x8 +29 |
| 18x8 +37 |
| 19x8.5 +31 |
| 19x8.5 +31 front / 19x10 +48 rear |
| 19x10 +48.1 |
| 20x9 +34 |
| 20x9 +34 front / 20x10 +48 rear |
| 20x10 +48.1 |
| 21x9 +34 front / 21x10 +48 rear |
| 21x10 +48 |
Widths and offsets with Verified Fitment on the 2021-2026 Mercedes-Benz S-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Offset range |
|---|---|---|
| 18-20" | 8" | +7 to +43 |
| 18-20" | 8.5" | +14 to +37 |
| 18-20" | 9" | +20 to +31 |
Wider still: 18x10 +12 to +24; 19x10 +12 to +24; 20x10 +12 to +24 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Offset range |
|---|---|---|
| 19-20" | 8.5" | +14 to +37 |
| 19-20" | 9" | +20 to +31 |
Wider still: 19x10 +12 to +24; 20x10 +12 to +24 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2021-2026 Mercedes-Benz S-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)








Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)
The 2021-2026 Mercedes-Benz S-Class (W223) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 18x8 +29; 18x8 +37; 19x8.5 +31; 19x8.5 +31 front / 19x10 +48 rear; 19x10 +48.1; 20x9 +34; 20x9 +34 front / 20x10 +48 rear; 20x10 +48.1; 21x9 +34 front / 21x10 +48 rear; 21x10 +48.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 18" to 20" in diameter; see the size table for the offset range at each width.