Bolt pattern, center bore, factory wheel sizes for each submodel and the aftermarket widths and offsets that bolt on to the Mercedes-Benz S-Class built from 2000 to 2006 (S430, S430 4MATIC, S500, S500 4MATIC, S350, S600, S55 AMG, S65 AMG).
Every 2000-2006 Mercedes-Benz S-Class uses a 5X112 bolt pattern with a 66.6 mm hub (center bore). Most aftermarket wheels are machined with a larger bore so one wheel can fit many cars; fit hub-centric rings with a 66.6 mm inner diameter so the wheel centers on the hub instead of the lugs. Lug thread is M14x1.5. Torque the lugs to the figure in your owner's manual and re-check them after the first 50 miles.
US-market submodels of the Mercedes-Benz S-Class (W220) and the model years each was sold. All of them share the 5X112 bolt pattern.
| Submodel | Years | Factory wheel sizes |
|---|---|---|
| S430 | 2000-2006 | 16x7.5 +46 16x7.5 +51 17x7.5 +46 17x7.5 +51 18x8 +44 18x8.5 +44 18x9 +44 18x9.5 +46 |
| S430 4MATIC | 2003-2006 | 17x7.5 +46 17x7.5 +51 18x8 +44 18x8.5 +44 18x9 +46 18x9.5 +46 19x8.5 +44 |
| S500 | 2000-2006 | 17x7.5 +46 17x7.5 +51 18x8 +44 18x8.5 +44 18x9 +46 18x9.5 +46 19x8.5 +40 |
| S500 4MATIC | 2003-2006 | 17x7.5 +46 17x7.5 +51 18x8 +44 18x8 +44 front / 18x9 +46 rear 18x8.5 +44 18x8.5 +44 front / 18x9.5 +46 rear 18x9 +46 18x9.5 +46 19x8.5 +44 |
| S350 | 2006 | 16x7.5 +46 16x7.5 +51 17x7.5 +46 17x7.5 +51 18x8 +44 18x8.5 +44 18x9 +46 18x9.5 +46 |
| S600 | 2001-2006 | 18x8 +44 18x8.5 +44 18x9 +46 18x9.5 +46 19x10 +45 |
| S55 AMG | 2001-2006 | See factory sizes below |
| S65 AMG | 2006 | See factory sizes below |
Wheel sizes Mercedes-Benz fitted to the 2000-2006 Mercedes-Benz S-Class from the factory (all submodels; the table above lists them by submodel). Offsets are ET in millimeters.
| Factory size |
|---|
| 16x7.5 +46 |
| 16x7.5 +51 |
| 17x7.5 +46 |
| 17x7.5 +51 |
| 18x8 +44 |
| 18x8 +44 front / 18x9 +46 rear |
| 18x8 +44 front / 18x9 +44 rear |
| 18x8.5 +44 |
| 18x8.5 +44 front / 18x9.5 +46 rear |
| 18x9 +44 |
| 18x9 +46 |
| 18x9.5 +46 |
| 19x8.5 +40 |
| 19x8.5 +44 |
| 19x10 +45 |
Widths and offsets with Verified Fitment on the 2000-2006 Mercedes-Benz S-Class: no fender rolling, spacers or camber changes, and the wheel sits like the factory one or a little further out. Offsets outside a range below either rub, poke past the fender or sit tucked in. Test-fit one wheel for brake and suspension clearance before mounting tires.
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 16-19" | 7.5" | +21 to +56 | +8 to +56 |
| 16-19" | 8" | +27 to +49 | +14 to +62 |
| 16-19" | 8.5" | +33 to +43 | +21 to +58 |
| 16-19" | 9" | — | +27 to +51 |
| 16-19" | 9.5" | — | +33 to +45 |
Wider still: 16x10.5 front — / rear +25 to +38; 16x11 front — / rear +31 to +32; 17x10.5 front — / rear +25 to +38; 17x11 front — / rear +31 to +32; 18x10.5 front — / rear +25 to +38; 18x11 front — / rear +31 to +32… fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 17-19" | 7.5" | +21 to +56 | +8 to +56 |
| 17-19" | 8" | +27 to +49 | +14 to +62 |
| 17-19" | 8.5" | +33 to +43 | +21 to +58 |
| 17-19" | 9" | — | +27 to +51 |
| 17-19" | 9.5" | — | +33 to +45 |
Wider still: 17x10.5 front — / rear +25 to +38; 17x11 front — / rear +31 to +32; 18x10.5 front — / rear +25 to +38; 18x11 front — / rear +31 to +32; 19x10.5 front — / rear +25 to +38; 19x11 front — / rear +31 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
| Diameter | Width | Front offset | Rear offset |
|---|---|---|---|
| 18-19" | 8" | +27 to +49 | +14 to +54 |
| 18-19" | 8.5" | +33 to +43 | +21 to +58 |
| 18-19" | 9" | — | +27 to +51 |
| 18-19" | 9.5" | — | +33 to +45 |
Wider still: 18x10.5 front — / rear +25 to +38; 18x11 front — / rear +31 to +32; 19x10.5 front — / rear +25 to +38; 19x11 front — / rear +31 to +32 fit with modifications (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts).
In-stock PG WHEELS sets in sizes with Verified Fitment for the 2000-2006 Mercedes-Benz S-Class. Each card shows only the sizes that fit; prices are for a set of 4 with free shipping in the lower 48.












Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)


















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)


















Modifications Required (roll rear fender lips, adjustable camber parts for extra negative camber, hub-centric rings (66.6 mm), correct-length ball-seat lug bolts)






The 2000-2006 Mercedes-Benz S-Class (W220) uses a 5X112 bolt pattern and a 66.6 mm center bore.
Factory sizes: 16x7.5 +46; 16x7.5 +51; 17x7.5 +46; 17x7.5 +51; 18x8 +44; 18x8 +44 front / 18x9 +46 rear; 18x8 +44 front / 18x9 +44 rear; 18x8.5 +44; 18x8.5 +44 front / 18x9.5 +46 rear; 18x9 +44; 18x9 +46; 18x9.5 +46; 19x8.5 +40; 19x8.5 +44; 19x10 +45.
Its wheel fasteners use a M14x1.5 thread.
Bolt-on sizes run from 16" to 19" in diameter; see the size table for the offset range at each width.